What Are Dermal Fillers Made Of? Composition & Specs
We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.

Auro thread

By AuroThread R&D Team | 21 October 2026 | 0 Comments

What Are Dermal Fillers Made Of?

Every dermal filler is made of four things, not one. There is the active substance that does the work, the carrier or diluent it is delivered in, the cross-linker that holds a hyaluronic acid gel together, and the excipients — buffers, salts and in many formulations a local anaesthetic. Product descriptions almost always name only the first, which is why two fillers described identically on a website can have entirely different specifications on their technical data sheets.

This page sets out what each layer is made of, how the materials are specified in numbers a buyer can compare, and what a label is required to declare — including a dedicated section on the composition question asked more often than any other, what are lip fillers made of. It is written for practitioners, clinic owners and procurement teams rather than patients, and it is the composition companion to how fillers are classified and how they work in tissue.

What Dermal Fillers Are Made Of: The Four Ingredient Layers

Layer What it is Why it matters to a buyer
Active substance Hyaluronic acid, calcium hydroxylapatite, poly-L-lactic acid or PMMA Determines mechanism, duration and reversibility
Carrier or diluent A gel, saline, phosphate buffer or sterile water for reconstitution Determines immediate behaviour and handling
Cross-linker BDDE (1,4-butanediol diglycidyl ether) in cross-linked HA products; none in the others Determines residence time and firmness; residual limits are a specification item
Excipients Buffer salts, sodium chloride, mannitol, lidocaine hydrochloride Affects comfort, viscosity and pH stability

A specification that states only "1 ml hyaluronic acid" answers roughly one quarter of the questions a clinic needs answered. It does not say whether the HA is cross-linked, at what concentration, in what buffer, or whether lidocaine is present.

The Active Substances and Where They Come From

The four active substances in clinical use have almost nothing in common chemically. The FDA's own consumer guidance describes them by origin rather than by brand, which is the most useful way to think about them.

Active substance Origin and chemistry Absorbed by the body
Hyaluronic acid A sugar naturally found in the body; produced industrially by bacterial fermentation, not harvested from animals Yes
Calcium hydroxylapatite A mineral and a major component of bone, produced synthetically and formed into microspheres Yes — dissolves gradually
Poly-L-lactic acid A biodegradable synthetic polymer with a long history of use as a suture material Yes — hydrolysed to lactic acid
PMMA Polymethylmethacrylate microspheres suspended in a collagen solution — the only non-absorbable FDA-approved option No — retained

Note what is absent from that table: injectable collagen as a stand-alone active substance. Historical collagen fillers required skin testing because of their animal origin and have largely been withdrawn; the only surviving role for collagen in this category is as a carrier for PMMA microspheres. Modern marketing use of the word "collagen" almost always refers to a filler that stimulates collagen production rather than one made of collagen.

Hyaluronic Acid: Source, Molecular Weight and Concentration

Where the raw material comes from

Injectable-grade hyaluronic acid is produced by microbial fermentation rather than extracted from animal tissue. This is significant for two reasons. First, it removes the animal-derived contamination risk that made the older collagen fillers require pre-treatment skin testing. Second, it means the raw material can be produced to a defined molecular weight range rather than accepted as whatever the source tissue happened to yield.

Products positioned on this point usually describe themselves as containing no animal ingredients. It is a legitimate specification difference and worth confirming on the data sheet, but it is also now the industry default rather than an exception — the absence of animal material is a baseline expectation, not a distinguishing feature.

Fine non-cross-linked hyaluronic acid filler, the hydration-grade HA product in the Auro Secret range

Molecular weight

Hyaluronic acid is a polymer, and its chains come in a range of lengths measured in daltons. Molecular weight affects how the raw material behaves in solution, how it binds water and how it is processed into a gel. Manufacturers buy HA to a defined molecular weight specification, because a batch outside that window will not produce the same gel when cross-linked.

Concentration

Concentration is normally given in milligrams of HA per millilitre of product, and it is not the same value across a range. Lighter, more superficial formulations typically carry a lower concentration; firmer products for deep placement generally carry a higher one. Comparing two fillers on concentration alone is misleading, however, because a product with a lower concentration but a higher degree of cross-linking can be firmer and longer-lasting than one with a higher concentration and less cross-linking.

Cross-linker and residual limits

The cross-linker used in HA fillers is BDDE. Its function is to bond the HA chains into a network, and its concentration during manufacture is one of the main variables a formulator controls. What matters for a buyer is not the cross-linker's presence but the residual amount remaining in the finished product. Unreacted cross-linker is a process residue, and finished-product specifications set a limit on it. A technical data sheet that states the cross-linking status but not the residual limit is incomplete for regulatory and due-diligence purposes.

The four layers, as documented for the AuroThread HA range

Applied to a real range, the four-layer model produces the specification below. Every value in it is a documented parameter rather than a description, which is the standard a buyer should hold any supplier to.

Parameter Documented value — AuroThread HA range
Active ingredient Cross-linked sodium hyaluronate, non-animal origin
HA concentration 20–24 mg/mL (varies by viscosity grade)
Cross-linking agent BDDE — residual content below the regulatory threshold
Gel consistency Smooth, cohesive gel — easy extrusion, minimal needle force
Volume per syringe 1mL, 2mL, 3mL and 10mL pre-filled syringe options
Needle / cannula compatibility Compatible with 27G–30G needles and 22G–30G blunt cannulas
Sterilisation Moist heat terminal sterilisation, individually packaged
Shelf life / storage 2 years from the date of manufacture; store at 2–25°C, away from direct sunlight, do not freeze
Certification CE Mark, ISO 13485 QMS, GMP facility
Particle size by grade Fine 0.10~0.15 mm · Derm 0.15~0.28 mm · Subskin 0.5~1.25 mm
Gel particles per ml Fine 200,000 · Derm 100,000 · Deep 10,000 · Subskin 5,000

Two things are worth reading off that table. The concentration band of 20–24 mg/mL is narrower than the range most suppliers quote, and the residual BDDE figure — "below the regulatory threshold" — is stated rather than omitted, which is what makes a cross-linking claim checkable. If a competitor's data sheet gives a concentration but no cross-linker residual figure, that is a gap in their documentation, not a detail you can infer.

Calcium Hydroxylapatite: Microspheres and Carrier

A CaHA filler is a suspension, not a gel. The active substance is produced synthetically as microspheres of a defined size distribution, and those spheres are dispersed in a gel carrier. Both components are specification items.

Component Function What to check
CaHA microspheres Provide the scaffold for the collagen response Particle size distribution — it governs how evenly the response is distributed
Carrier gel Delivers immediate volume and keeps the particles suspended What the carrier is made of — older formulations use carboxymethylcellulose, newer ones a hyaluronic acid gel

The choice of carrier changes the product's behaviour meaningfully. A carboxymethylcellulose carrier provides delivery and suspension only; a hyaluronic acid carrier adds water binding and the immediate volume behaviour of HA on top of the mineral's longer-term collagen effect. This is the "dual-effect" format, and it is why the carrier belongs on the data sheet rather than in a footnote. The CaHA collection lists which format each line uses.

UniCaHA 1.1ml syringe showing calcium hydroxylapatite microspheres suspended in a hyaluronic acid carrier

Two further composition facts are commonly cited for CaHA. It is biosynthetically produced and contains no animal or animal-derived material, which is why no pre-treatment skin test is required. And because the microspheres are suspended in a viscous carrier rather than being a free fluid, the material is described as staying where it is placed rather than migrating.

Poly-L-Lactic Acid: Powder, Fill Weight and Reconstitution

PLLA is the only material in this category supplied as a powder rather than a ready-to-inject liquid. The composition of the vial is therefore only half of the product; the other half is what it is reconstituted with.

Specification item Why it is a composition issue, not a handling detail
PLLA fill weight per vial Sets how much polymer is present; the working concentration is derived from this figure
Reconstitution volume Divides the fill weight — the same vial diluted differently produces two different products
Particle size Affects distribution and the evenness of the collagen response
Excipients in the vial Mannitol and similar agents are used to maintain the lyophilised cake and aid resuspension

Because the concentration depends on the reconstitution step, a PLLA specification quoted as a weight alone is not comparable with another PLLA product. Two vials of equal fill weight, hydrated with different volumes, are different products — so a buyer comparing PLLA offers should ask for the fill weight and the reconstitution volume stated in the instructions for use, rather than accepting either figure on its own. Our own Angelfill line is documented by fill weight, as a 150 mg (PLLA) lyophilised vial, with reconstitution carried out according to the instructions for use supplied with the product. The PLLA collection lists the fill weight for each line. Where a reconstitution volume is not published on a product page, treat it as something to request from the supplier rather than something to assume.

Angelfill poly-L-lactic acid filler supplied as a 150mg (PLLA) lyophilised vial requiring reconstitution before injection

What Are Lip Fillers Made Of?

Lip fillers are not a separate material category. In clinical practice they are hyaluronic acid products, specified differently from the formulations used for deep structural work — which is why the answer to "what are lip fillers made of" is a narrower version of the answer above.

Component In a lip filler
Active substance Cross-linked hyaluronic acid, typically at a lower concentration than deep-placement products
Cross-linker BDDE, at a lower cross-linking density than structural products, producing a softer and more flexible gel
Carrier Physiological buffer, typically phosphate-buffered saline
Excipients Frequently lidocaine hydrochloride, because the lip is a sensitive area

The functional difference from a deep-placement product is rheological rather than chemical. Lip tissue is mobile, thin-walled and highly vascular, so the gel needs to be soft enough to move with the lip and to conform to its shape, rather than firm enough to hold projection under load. That is achieved by reducing cross-linking density, not by changing the base material. In practice this means lip products sit in the low-to-medium G-prime classes described on the classification page.

Two consequences follow for anyone specifying or buying lip product. First, a firm deep-placement filler used in a lip will behave inappropriately — the rheology is wrong for the tissue, not the chemistry. Second, because lip fillers are HA, they remain dissolvable with hyaluronidase, which is one reason HA dominates this particular application. AuroThread's lip and superficial-face lines are 1 ml HA formats in the 1 ml lip formulation and the 1 ml cheek formulation — see the full range for both.

What Dermal Fillers Are Not Made Of

The composition of a legitimate injectable-grade filler excludes several things that appear in unapproved products, and this is one of the clearer signals of regulatory status.

Substance Status
Animal-derived collagen as an active substance Historical formulations only; modern HA is fermentation-derived. Collagen survives as a carrier in PMMA products
Silicone Not an approved filler material for cosmetic injection
Permanent fillers other than PMMA The FDA states there is only one approved dermal filler that is not absorbed by the body, and it is the PMMA format

For a buyer, the practical test is not the ingredient list alone but whether the product is documented as a registered medical device. Injectables that reach the market without that documentation are the category in which non-approved materials appear, and the FDA maintains its own warnings on unapproved fillers on that basis.

Reading a Filler Specification: Concentration, Volume and Units

Composition figures are given in units that are easy to misread, and comparing two products requires all of them.

Figure What it means Common misreading
Concentration Milligrams of active substance per millilitre Treated as a proxy for quality; it is not — cross-linking matters as much
Volume per syringe Millilitres of finished product in one syringe Confused with the fill weight of a powder format
Units per box How many syringes ship in one retail pack Missed entirely, so per-unit cost is calculated incorrectly
Fill weight Milligrams of polymer in a lyophilised vial Read as concentration without accounting for reconstitution volume

A workable rule when comparing offers: convert everything to a cost per millilitre and a concentration per millilitre before comparing price. The definition page walks through how a single syringe is described and packaged for exactly this reason.

What Must Be Declared on the Label and Data Sheet

Because fillers are regulated as medical devices, the composition information is not optional marketing. A compliant product documentation set carries the following.

Element Why a buyer should look for it
Declared composition and concentration Establishes exactly what is in the syringe, in units that can be compared
Instructions for use States intended layer, volume and the needle or cannula specification
Manufacturer and legal manufacturer details Identifies who is accountable for the device, distinct from who sells it
Declaration of conformity and certification Establishes the regulatory route and the quality management standard behind it
Batch number and expiry Links the physical unit to a certificate of analysis for that batch

A device manufacturer operating to a recognised quality management standard will hold all five as routine documents rather than producing them on request. The complete dermal filler guide covers the manufacturer-verification process end to end, and the main overview covers how FDA and CE routes differ.

AuroThread Material Transparency

AuroThread manufactures across all three absorbable material families, which means the composition specification for each is available on the same document set. The mapping of line to active substance and format is as follows.

Line Active substance Composition format
Auro Secret Plus Cross-linked hyaluronic acid 1mL, 2mL, 3mL and 10mL pre-filled syringe options, individually packaged, across four depth grades
Fine HA (non-cross-linked) Non-cross-linked hyaluronic acid Hydration-grade HA for superficial use; no cross-linker
UniCaHA Calcium hydroxylapatite microspheres 1.1 ml syringe; HA carrier for dual-effect behaviour
Angelfill Poly-L-lactic acid 150 mg (PLLA) lyophilised vial

Full specifications, including multi-specification packs and customised packaging, are listed in the dermal filler range.

Frequently asked questions

Select a question to open the answer.

What are dermal fillers made of?

Four components. An active substance — hyaluronic acid, calcium hydroxylapatite, poly-L-lactic acid or PMMA — plus a carrier or diluent, a cross-linker where the product is a cross-linked HA gel, and excipients such as buffer salts and often lidocaine. Product descriptions usually name only the active substance, which is why two products that read identically can have different specifications.

What are lip fillers made of?

Lip fillers are hyaluronic acid products, so their composition is cross-linked HA with a phosphate-buffered saline carrier, a BDDE cross-linker at a lower density than structural products, and frequently lidocaine. The difference from a deep-placement filler is rheological rather than chemical: lower cross-linking produces a softer gel that moves with the lip and conforms to its shape, instead of a firm gel designed to hold projection under load.

Is hyaluronic acid in fillers animal-derived?

No. Injectable-grade hyaluronic acid is produced by microbial fermentation rather than extracted from animal tissue, which is why pre-treatment skin testing is not required for HA fillers. Products marketed as containing no animal ingredients are confirming a property that is the industry default. Historically, collagen fillers were animal-derived and did require skin testing; that is a separate material that has largely been withdrawn.

What is BDDE and is it safe in a filler?

BDDE is 1,4-butanediol diglycidyl ether, the cross-linking agent used to bond hyaluronic acid chains into a stable network. Its presence during manufacture is what makes an HA filler last months rather than days. What matters in the finished product is not the cross-linker's use but the residual amount remaining after processing, which finished-product specifications set a limit on. A data sheet that states the cross-linking status without a residual limit is incomplete.

Does a higher HA concentration mean a better filler?

Not on its own. Concentration is given in milligrams per millilitre, and lighter superficial formulations generally carry less than firm deep-placement products. But a lower-concentration product with a higher degree of cross-linking can be firmer and longer-lasting than a higher-concentration product with less cross-linking. Concentration and cross-linking have to be read together, which is why comparing products on concentration alone is misleading.

What is the carrier in a calcium hydroxylapatite filler?

It varies, and this is a genuine specification difference. Older CaHA formulations suspend the microspheres in a carboxymethylcellulose gel, which delivers and suspends the particles. Newer formulations use a hyaluronic acid carrier, which adds water binding and the immediate volume behaviour of HA to the mineral's longer-term collagen effect. That is the dual-effect format, and the carrier should be stated on the data sheet.

If PLLA filler is a powder, what exactly is in the vial?

Lyophilised poly-L-lactic acid particles at a stated fill weight, together with excipients such as mannitol that maintain the freeze-dried cake and aid resuspension. The working product only exists after reconstitution, which is why the diluent volume is part of the specification: the same vial hydrated with different volumes of sterile water yields two different concentrations. A PLLA specification quoted as a weight alone cannot be compared with another product.

Do fillers contain lidocaine?

Many do, particularly products intended for sensitive or mobile areas such as the lips, where lidocaine hydrochloride is added to improve comfort during injection. Whether lidocaine is present is a composition item and should appear on the specification. A clinic may also want to know which of its stock lines contain it, because it is a factor when a patient reports a local anaesthetic sensitivity.

Are any dermal fillers permanent?

One format is. The FDA states that there is only one approved dermal filler that is not absorbed by the body, and it is made from polymethylmethacrylate microspheres suspended in a solution containing collagen. Every other approved filler material is absorbed over time. Products marketed as permanent outside that approved format are a regulatory warning sign rather than a feature.

How do I compare the composition of two filler offers?

Convert both to the same units first. Establish the concentration in milligrams per millilitre, the volume per syringe, the number of units per box, and — for powder formats — the fill weight plus the stated reconstitution volume. Then calculate cost per millilitre rather than cost per box. Comparing list prices across different pack configurations is the most common error in filler procurement, because the unit count is the figure most often left out of a quotation.

Is a made-of description enough to verify a filler?

No. Composition is one of five documents. A full verification set is the declared composition and concentration, the instructions for use with intended layer and volume, the legal manufacturer's details, a declaration of conformity or certification establishing the regulatory route, and a batch number linking the physical unit to a certificate of analysis. A composition statement alone does not establish that the product is a registered medical device, which is the question that matters most in procurement.

Supplying a clinic or building your own filler brand? AuroThread manufactures across hyaluronic acid, calcium hydroxylapatite and poly-L-lactic acid with full documentation and OEM capability. Request wholesale pricing and samples · Browse the dermal filler range

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
验证码
POPULAR BLOG