Auro Secret Hyaluronic Acid Fillers Guide
Auro Secret is AuroThread's cross-linked hyaluronic acid dermal filler family: a non-animal-origin HA gel stabilised with BDDE, supplied in four particle grades and manufactured under CE marking, ISO 13485 and GMP. That sentence is the short version. Everything below is what a buyer actually needs to check before the name means anything — grade-by-grade specification, the documents that back each claim, and the two specification fields this page deliberately does not guess at.
A brand page is the wrong place for adjectives and the right place for a specification. This one is written so it can be read side by side with a certificate of analysis.
Key takeaways
• Four HA grades — Fine, Derm, Deep, Subskin — separated by particle size and particle count, not by brand tier.
• Particle count runs from 200,000 per mL at the fine end to 5,000 per mL at the deepest, a forty-fold span.
• HA concentration is stated as 20–24 mg/mL depending on viscosity grade; individual grade pages state 20 mg/mL for Fine, Derm and Deep.
• Sterilisation is a moist heat terminal process at 121 °C with each syringe individually packaged; storage 2–25 °C, do not freeze; shelf life 2 years.
• Dermal fillers in this family are presented for facial use. Body contouring is outside what this range claims.
In this guide
What the family contains · The four grades · Auro Secret Plus · Cross-linking
Duration figures · Documentation · Buying terms · Who it suits
What the Family Contains
The Auro Secret line is a single material — hyaluronic acid, non-animal origin, produced by bacterial fermentation rather than extracted from tissue — divided into grades by how the gel is built rather than by packaging.
Fillers are supplied in 1 mL, 2 mL, 3 mL and 10 mL formats, each syringe individually packaged. Needles from 27G to 30G and blunt cannulas from 22G to 30G are listed as compatible with the range, which matters because the delivery device and the particle band have to agree.
The Four Grades
The distinction between grades is a particle-size distinction, and it maps to how deep the gel can be placed and how much lift it carries. The figures below are taken from the individual product pages.
| Grade | Particle size | Particles per mL | Needle | Stated plane |
|---|---|---|---|---|
| Fine | 0.10–0.15 mm | 200,000 | 27G | Upper dermis |
| Derm | 0.15–0.28 mm | 100,000 | 27G | Mid dermis |
| Deep | 0.28–0.50 mm | 10,000 | 26G | Deep dermis |
| Subskin | 0.5–1.25 mm | 5,000 | — | Deep subdermal planes |
Two things are worth reading off that table. First, particle count spans a forty-fold range from Fine to Subskin while concentration stays flat — the grades are separated by structure, not by how much HA is in the syringe. Second, the needle gauge tightens as the particles shrink, which is what sets the practical limit on where each grade can go through a given bore.
For the mechanism behind those two observations, the technical guide to HA fillers covers cross-linking chemistry and gel measurement in detail; the area-by-area overview maps particle bands to facial zones.
Need the grade sheet rather than the marketing page? AuroThread supplies a single comparison sheet covering particle size, particle count, HA concentration, needle and cannula compatibility, sterilisation method, storage and shelf life for all four grades.
Auro Secret Plus
Auro Secret Plus is the upgraded presentation of the same HA family, supplied in 1 / 2 / 3 / 10 mL formats and individually packaged. The specification fields that distinguish it are process fields rather than material ones: moist heat terminal sterilisation at 121 °C, CE marking, ISO 13485 and GMP manufacture, with traceability from raw HA powder to the finished sterile syringe.
A long-duration variant is listed alongside the standard unit. Where the two differ in stated longevity, the grade page figure governs — this page does not publish a number that the product page does not carry.
Cross-Linking: The Step That Makes It a Filler
Native hyaluronic acid clears from tissue in days, which is why no unmodified HA product functions as a filler. Stabilising it requires linking the polymer chains into a network, and the industry-standard linking agent is BDDE (1,4-butanediol diglycidyl ether).
Two consequences follow, and both belong in a purchase conversation. Cross-linking slows enzymatic breakdown, which is what makes duration possible. Unreacted BDDE residue is a process contaminant that regulators cap and that has to be measured, not merely declared absent.
Auro Secret is specified as BDDE cross-linked, with residual BDDE stated as below the regulatory threshold. The threshold number is not published on the current product pages, and this page does not invent one. It is a legitimate question for a certificate of analysis, alongside the related field of whether a given SKU is supplied with lidocaine — also not stated on the product pages.
The Duration Figures, Kept Separate
Three numbers legitimately describe HA filler duration. Presenting them as one figure is the most common way a specification drifts away from reality, so they are listed here as three.
| Figure | Value | What it actually describes |
|---|---|---|
| Regulatory | Approx. 6–12 months | The FDA's statement about the HA material class as a whole |
| Manufacturer | 6–18 months | AuroThread's stated range across HA grade pages |
| Grade-level | 6–9 months (Fine) | The collection-level figure for the finest grade specifically |
A note a buyer should be given rather than spared: the site is not yet internally consistent on HA duration, and the figures above come from different pages. The Fine grade page and the collection page do not state the same range. Where they disagree, treat the product page as the unit-level specification and raise the discrepancy with the supplier — which is the correct outcome for a document-driven purchase either way.
What Ships With the Order
Six documents decide whether a shipment is usable in a regulated market. For Auro Secret the stated positions are:
- Certification — CE marked; ISO 13485; GMP manufacture.
- Origin — non-animal hyaluronic acid by bacterial fermentation.
- Cross-linking — BDDE; residual stated as below the regulatory threshold.
- Sterility — moist heat terminal sterilisation at 121 °C, individually packaged syringes.
- Stability — store at 2–25 °C away from direct sunlight, do not freeze, 2-year shelf life from manufacture.
- Traceability — lot-level tracking from raw HA powder to finished syringe; certificate of analysis available on request.
Buying Terms
Auro Secret is sold business to business: clinics, distributors and private-label programmes. Minimum order quantity, unit pricing, lead time and Incoterms are quoted per destination rather than published, because the regulatory route and the shipping terms change by market.
The practical sequence is the same for any device purchase of this kind: confirm the certification set covers the destination market, take a sample lot against the certificate of analysis, then agree MOQ and terms once the documents hold up. The supplier selection checklist sets that out step by step.
Who This Range Suits — and What It Is Not
A four-grade HA ladder with a forty-fold particle span is built for a clinic or distributor that wants one material family covering the full depth range, with the reversibility that comes with hyaluronic acid. The trade-off is that the range does not include biostimulatory materials; those sit in separate families — calcium hydroxylapatite and poly-L-lactic acid.
Three things this range is not, stated plainly:
- Not a body contouring product. The FDA states that no injectable filler is approved for body contouring and warns specifically against breast, buttock and intermuscular injection because of serious injury including death. Auro Secret dermal fillers are presented for facial use.
- Not a botulinum toxin. AuroThread manufactures dermal fillers, skinboosters and threads. It does not manufacture or supply botulinum toxin products, and this page does not imply otherwise. The difference between the two categories is set out in dermal filler vs Botox.
- Not a prescription-free purchase. Injectable fillers are prescription products in the markets where they are cleared.
Fine
0.10–0.15 mm · 200,000/mL · 27G · upper dermis
The finest band in the range, for shallow placement under thin skin.
View Product
Derm
0.15–0.28 mm · 100,000/mL · 27G · mid dermis
The general-purpose band where fold depth and skin thickness are moderate.
View Product
Deep
0.28–0.50 mm · 10,000/mL · 26G · deep dermis
Larger particles for support where the plane sits deeper.
View Product
Subskin
0.5–1.25 mm · 5,000/mL · deep subdermal planes
The coarsest band, specified for the deepest placement in this range.
View ProductFrequently Asked Questions
What is Auro Secret?
Auro Secret is AuroThread's cross-linked hyaluronic acid dermal filler family, supplied in four particle grades and manufactured under CE marking, ISO 13485 and GMP.
Is Auro Secret monophasic or biphasic?
The published product pages do not classify the grades that way, so this page does not either. The distinction describes whether cross-linked particles are dispersed in a free carrier gel or blended into a single homogeneous phase; it is a legitimate question to put to a supplier, and a written answer should be consistent with the particle data on the technical sheet.
Does Auro Secret contain lidocaine?
Whether a specific SKU is supplied with lidocaine, and at what concentration, is not listed on the current product pages. Some hyaluronic acid fillers on the market do include it. Confirm against the grade's data sheet before specifying it to a clinic.
How long does Auro Secret last?
AuroThread's HA grade pages state 6 to 18 months. The FDA describes the HA material class as lasting approximately 6 to 12 months, and the collection page gives 6 to 9 months for the Fine grade. These are three different kinds of figure and should not be merged into one claim.
Which Auro Secret grade is used for which area?
The grades are separated by particle band and stated injection plane: Fine for upper dermis, Derm for mid dermis, Deep for deep dermis and Subskin for deep subdermal planes. Matching a plane to a facial zone is a clinical decision; the area-by-area mapping is described in the facial fillers overview.
Is Auro Secret CE marked?
The range is presented as CE marked and manufactured under ISO 13485 and GMP. A certificate number, classification, issuing notified body and expiry date are the fields that make that verifiable, and they are supplied on request rather than printed on the public page.
How should Auro Secret be stored and for how long?
Store at 2 to 25 degrees Celsius away from direct sunlight, do not freeze. Shelf life is two years from the manufacturing date. Both figures matter for international shipment across climate zones.
Can Auro Secret be used for body contouring?
No. The FDA states that no injectable filler is approved for body contouring and warns against injection into the breasts, buttocks or intermuscular spaces because of serious injuries including death. This range is presented for facial use.
Does AuroThread supply botulinum toxin?
No. AuroThread manufactures dermal fillers, skinboosters and thread products. Botulinum toxin is a different product category regulated as an injectable drug, and it is outside this range.
How do a clinic or distributor order Auro Secret?
Minimum order quantity, unit price, lead time and Incoterms are quoted per destination because regulatory routes differ by market. The usual sequence is documents first, sample lot second, commercial terms third.
Start with the documents. Request the certification set, a lot-linked certificate of analysis and the four-grade comparison sheet before discussing price.
